OKULEN® 1000 - ESD - FN9060

OKULEN® 1000 - ESD - FN9060 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol..

Properties:

• good wear resistance
• high notched impact strength
• electrically dissipative properties (ESD-D)
• Surface resistivity between 1.0E6 to 1.0E9 Ohms

ESD

Characteristics and standard values
Properties
Method
Unit
OKULEN® 1000 - ESD - FN9060
Physical properties      
 Molecular-weight k.a. Mio. g/mol. ~ 5.0
 Density DINENISO 1183-1 (04/2013)
ASTM D792
g/cm³ > 0.950
 Notched impact strength DINENISO 11542-2 (01/2010) kJ/m² > 140
 Abrasion-Index (Sand-Slurry) DINENISO 15527 (05/2013) 100
 Tensile strength at yield (1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 18
  --- ---
 Elongation (Break / 1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
% > 350
 Tensile-E-modulus (1B - 1mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 680
  --- ---
 Static Friction ASTM D 1894 (2011) ~ 0.15-0.20
 Dynamic Friction ASTM D 1894 (2011) ~ 0.10-0.15
 Shore-D-Hardness, 3 sec. value 6 mm plate DINENISO 868 (10/2003) D 61 - 65
 Ball indentation hardness DINENISO 2039 N/mm² 35
 Water absorption DINENISO 62 (05/2008) % < 0.01
Thermal properties      
 Melting Point (DSC) DINENISO 11357-1 (03/2010) °C 133 - 135
 Thermal Conductivity Wire method W/m*K ~ 0.41
 Max. operation temperature Literature °C ~ 80
 Coefficient of thermal expansion (23 - 80°C) ISO 11359 mm/mm °C ~ 0.00015 - 0.00020
Electrical properties      
 Volume resistivity DINEN 62631-3-1 (01/2017) Ohm*cm ---
 Surface resistivity DINEN 62631-3-2 (10/2016) Ohm <1.0E9 - >1.0E6
 ATEX-Directive - TÜV approved! ATEX-Directive ---
 ESD-D --- Ohm 1.0E6 - 1.0E9
Burning properties      
 Fire resistance (Self-classification) DIN 4102 Klasse B2
 Fire resistance (Self-classification) UL94 Klasse HB
Physiological properties      
 Food compliant Nein / No
The above data are based on the present knowledge and are given without guarantee. Existing laws and conditions are to be respected by the user of our products. The decision about the suitability of a material for a certain application must be made by the user. We reserve the right to alter the indicated data. The indicated values are for a 15 mm thick sheet.
 
 

Copyright © 2021 OKULEN® all rights reserved.